DYNAMIC BALANCING MACHINES
|
|
| According to ISO definition, balancing is a procedure by which the mass distribution of a rotor is checked and if necessary, adjusted in order to ensure that the vibration of the journals and or forces on the bearings at a frequency corresponding to the service speed is within specified limits. Our machines are designed fully indigenous, safety and easy of handling and is appropriate electronic unit for your balancing problem. Its latest model consist of electronic control panel having digital/analogue meters for unbalance amount and angle. Our machine range capacity from 10kg to 20tons.. |
TECHNICAL DATA
KE HORIZONTAL TWO PLANE HARD BEARING, DYNAMIC BALANCING MACHINES
| MODELS | Unit | KHB-10 | KHB-30 | KHB-50 | KHB-100 | KHB-300 | KHB-650 | KHB-1T | KHB-3T | KHB-7T | KHB-10T | KHB-20T |
| Weight of job | Kg | 0.5-10 | 37286 | 18295 | 3-100 | 10-300 | 6.5-650 | 10-1000 | 30-3000 | 70-7000 | 100-10000 | 200-20000 |
| Maximum diameter of the job | mm | 500 | 500 | 500 | 1000 | 1000 | 1600 | 2000 | 2400 | 2400 | 3000 | |
| Maximum distance measured from coupling end to extreme bearing center | mm | 500 | 500 | 1200 | 1400 | 1400 | 1650 | 1650 | 2400 | 3300 | 3300 | 3300 |
| Minimum distance between bearings | mm | 50 | 75 | 75 | 90 | 110 | 300 | 350 | 500 | 560 | 560 | 660 |
| Journal diameter | mm | 18384 | 18384 | 18384 | 15-80 | 20-120 | 20-120 | 25-140 | 35-200 | 55-300 | 55-300 | 70-300 |
| Balancing speed of machine | RPM | 1200 | 700 | 700 | 600 | 500 | 350 | 300,600 | 250-500 | 200,400 | 200,400 | 200,400 |
| Drive motor | HP | 0.33 | 0.75 | 0.75 | 1.5 | 3 | 5 | 7.5 | 20 | 30 | 40 | 60 |
| Acceleration capability (GDČnČ) | KgmČnČ | 0.29 x 106 | 0.37 x 106 | 0.37 x 106 | 0.88 x 106 | 3.9 x 106 | 8.56 x 106 | 14.12 x 106 | 88 x 106 | 168 x 106 | 216 x 106 | 301 x 106 |
| Minimum unbalance mass read | gm | 0.01 | 0.1 | 0.1 | 0.1 | 0.2 | 0.4 | 0.2 | 0.4 | 1 | 1.6 | 3.2 |
| Maximum unbalance mass @100% of meter scale | gm | 50 | 125 | 250 | 250 | 750 | 750 | 1250 | 3750 | 7500 | 10000 | 20000 |
| Minimum unbalance | gm-mm | 0.5 | 1.25 | 2.5 | 5 | 15 | 9 | 10 | 30 | 72 | 96 | 240 |
| Minimum
achievable unbalance (for maximum weight of rotor) |
Microns
orgm-mm/ Kg |
0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
| Dynamic
Balancing Services | | Conditional Monitoring /Vibration
Consultancy | | In - Situ Balancing Services
|
| Blowers Repairs & Systems
| | Noise
Measurement | | Dynamic Balancing Machine | | Vibration Meter ( 2040 & 2050 )
|
| Hard Bearing Belt Drive Balancing Machine
| |
Vibration Analyser
Cum Dynamic Balancer ( 6050 ) |
| Computerised Portable Balancer ( 2100 )
| | Vibration Monitors ( 7000 )
| | Sound Level Meter | | Bearing
Tester ( 2021T ) |
