Automatic loading and unloading of the assembly line.
12 inch human-machine interface.
Six-axis linkage simultaneous processing.
Short product replacement time.
Soft-bearing balance measurement system.
Widely used in balance measurement and correction of water pumps and other products which need remove weight on end face can be connected to rotor production line to achieve automatic production.
End Face Drilling Four Station Automatic Balancing Machines
| Technical data at a glance | A4WZ1 |
| Max Weight of Workpiece (kg) | 1.6 |
| Max Diameter of Workpiece (mm) | 30-130 |
| Journal Diameter (mm) | φ5-16 |
| Balancing Speed (r/min) | ,≤2500 |
| Balancing Motor Power (kw) | 0.4 KW Servo Motor |
| Min Achievable Residual Unbalance Amount (g.mm/kg) | ≤0.3 |
| Testing Time (second) | 5-9 |
| Reduction Rate of Unbalance | ≥90% |
| Working Pressure (MPa) | 0.4-0.6 |
| Operating Voltage (V) | AC: 380V external |
| Milling Mode | Drilling |
| Take Time (second) | 12-15 Drilling once on the left and right side |
| Drilling Power (kw) | 0.75 |
| Average Machine Consumption(l/min) | 50 |
| Balancing Machine Type | Soft Bearing Measuring Bracket |
| Machine Total Power (kw) | 9.5 |
| Protection | Phase Sequence Protection, Overload Protection, Air Pressure Monitoring |
